Main Features

M-Lab NDT Speed Test

Powered by M-Lab (Measurement Lab), netMeter offers single-stream performance measurements of a connection’s capacity for “bulk transport”, including metrics for upload and download speeds, as well as latency. By integrating this functionality, we not only provide users with diverse speed measurement solutions but also contribute to M-Lab’s open-source internet speed measurement project, promoting internet research.

nPerf Internet Speed Test

Powered by nPerf, netMeter allows users to conduct reliable TCP Throughput Tests from anywhere in the world, leveraging over 2,000 nPerf Speed Test servers globally. Users can perform tests with a maximum throughput of 1Gbps in both directions, either automatically selecting the nearest server or manually choosing servers from a desired country/location.

IPTV Streaming Test

netMeter facilitates the assessment of Quality of Service (QoS) for IPTV services transmitted via MPEG2TS over RTP, enabling users to register and join multiple multicast channels. During testing, it measures crucial metrics like IGMP Join Delay, ETSI TR 101 290 1st Priority, and Media Delivery Index (RFC 4445) to gauge the performance and reliability of the broadcast streams.

iPerf3

netMeter supports iPerf3 and offers both Client and Server modes. In Client mode, netMeter connects to iPerf3-compatible servers to conduct Network Throughput Tests, while in Server mode, it provides Network Throughput Tests to all iPerf3-compatible clients.

TWAMP

netMeter supports sender mode and responder mode for TWAMP Light. In Sender mode, it provides TWAMP tests to all responders satisfying RFC 5357 TWAMP Light specifications, while in Responder mode, it connects to senders. By running two netMeter devices, end-to-end TWAMP tests can be conducted.

Packet Capture

Through mirroring, netMeter collects bidirectional packets exchanged between the network and the connected physical device. These collected network packets are stored in PCAP files and can be saved to netMeter Cloud or USB Flash.
‍
Specification: file size limited to 100MiB.

Ping Test

netMeter supports the emulation of network packet characteristics sent to the physical device. This includes the ability to emulate delay, loss, and bandwidth, with the flexibility to apply multiple metrics simultaneously.

Traceroute Test

netMeter incorporates the widely used traceroute functionality, enabling users to trace network paths and visualize routes to destinations.

Network Emulation

netMeter supports the emulation of network packet characteristics sent to the physical device. This includes the ability to emulate delay, loss, and bandwidth, with the flexibility to apply multiple metrics simultaneously.

LAN Scan

Through LAN Scan you can identify and catalog the names, IP address, and MAC addresses of devices within a network. This feature helps network administrators monitor and manage devices on the network.

LLDP/CDP

netMeter provides LLDP/CDP. LLDP includes system name, chassis ID, port ID, Device info, VLAN info.

CDP, developed by Cisco allows Cisco network deivces to share information.

  • Result

  • PDF

  • CSV

How-To-Use netHub for NEXTLab netMeter N1